Marking paints

Kronalux® 2K-Rolling plastic 763

Kronalux® 2K-Rolling plastic 763
2C roll plastic: Cold plastic, solvent-free, ideal for surface markings, textured and non-slip surfaces.
Kronalux® 2K-Rolling plastic 763
usage calculator
Please enter here the surface size in m².
m2
result at a averaged usage from 0.33 m²/kg:
per coat
Please consider: the usage values are ca.-values and could varied depending on the constitution of the underground

2K-Rollplastik is a solvent-free two-component cold plastic based on acrylic polymers. Kronalux® 2K-Rollplastik is especially suitable for the production of surface markings with slightly structured and non-slip surfaces.
Available from June 2023

  • For full-surface markings, also on asphalt
  • Slip resistance due to non-slip material
  • Excellent day and night visibility - even in wet conditions!
  • For very durable markings
  • Easy to apply

Pot life:    

approx. 10 minutes. at 20°C (shorter pot life at higher temperatures).

Mixing ratio:

99 : 1 (parts by weight) with peroxide hardener.

Substrate preparation:
Coatings on concrete, screed, asphalt:

Mineral substrates must be well set before painting, new concrete must be at least 4 - 6 weeks old. The substrate must be dry, clean, grease-free and load-bearing, loose and sanding layers must be removed. Concrete and screed must still have sufficient absorbency to ensure adhesion. Any cement paste and sinter layers on the surface must be removed by sandblasting or milling. Oily concrete surfaces that have already been used are best cleaned by brushing with Jaeger 080 Special Cleaner or alkaline cleaning agents. Wash with plenty of water or with a steam jet. Allow surfaces to dry thoroughly afterwards. Exposure to moisture on the reverse side will impair adhesion.  Sand old coatings; we recommend preliminary tests to check adhesion. Not suitable for glass. Carry out preliminary tests on plastics.

Number of coats:

1x with spatula or texture roller

Note: When marking the entire surface, cracking may occur on asphalt under strong sunlight, especially on young asphalt. On paving stones, cracking may occur in the joints. 

Application conditions:

During the entire application and drying time, the material, substrate and air temperature must not fall below 8°C and must not exceed 30°C. The air humidity should be between 30% r.H. and 75% r.H. during the entire time.
Post-sprinkling agent 759 must be sprinkled in immediately after application, if necessary.

Tool cleaning:    

With Jaeger Special Thinner 97

product data

spreading rate
paint/roll spraying
0,33 m²/kg
item number/shade
item number shade
763-0800 Weiß
763-0009 Base Transparent
size of trading unit/box content
size of trading unit box content

suitable products

097 Special Thinner
750 Kronalux® Road Marking Paint HS
752 Kronalux® Marking Paint
753 Kronalux® Marking Spray
757 Kronalux® 2K-PU-Industry Marking Paint
761 Kronalux® 2K-PU-Industry-Markierspray