Sinolin® Aqua Radiator Lacquer 377

Properties:

Heat-resistant up to 120°C, non-yellowing, quick-drying, low odour, very good flow, good coverage, good resistance to common household cleaning agents.

Surface preparation:

The surface must be dry and free from rust, scale, oil, grease and other contamination; remove any loose paint. Old paintwork must be sanded down. Thoroughly clean metal surfaces and prepare rusted surfaces to the standard cleanliness level SA 2½ according to DIN EN ISO 12944-4. Bare areas must be pre-primed with Aqua Multi-Primer 716 as corrosion protection and rust spots must be exposed and also pre-primed. Primers must be applied opaquely until a closed film of lacquer is formed. Radiators must be switched off during application and only gradually heated up again after the coating has dried.

Structure of coating:

Old coating:
1-2 x Aqua Radiator Lacquer 377
Unprimed steel:
1-2 x Aqua Multi-Primer 716
1-2 x Aqua Radiator Lacquer 377

Coverage:

brush/roll 8-10 m²/l, spray approx. 6 m²/l

Colour tone/gloss level:

RAL 9016, high gloss, satin-finish and matt, tintable in RAL and NCS from white base.

Drying time: (at 20°C and 55% r.H.)

dust-dry from approx. 1 hour, touch-dry from 2-3 hours, recoatable from 8-10 hours.

Dilution:

Ready to use in delivery form, if required with water

Storage:

Store in a cool, dry place. 2-year shelf life in an unopened, original container. Protect against frost.